Contents

Combine several movie titles from multiple DVDs to one BD-R/RE.


Step 1: Run DVD-Cloner and select the “Combine multiple DVDs to one DVD±R DL or BD-R (DL)” copy mode on the Expert interface.

https://s1.occld.com/image/kb/kb_355_1_20220325.jpg

Step 2: Insert the source DVD disc and select the target Blu-ray burner and then click on the “Next” button. If there are several readers on your computer, DVD-Cloner will automatically select the reader with a DVD movie and display the brief information about the DVD movie.

https://s1.occld.com/image/kb/kb_355_2_20220325.jpg

Step 3: Select the “Combine several movie titles from multiple DVDs to one BD-R (DL)” copy mode on the lower right side and then click on the “Next” button.

https://s1.occld.com/image/kb/kb_355_3_20220325.jpg

Step 4: Affirm the copy configuration. In this window there will be the task information. Make sure all the information is correct and click on the “Start” button.

https://s1.occld.com/image/kb/kb_355_4_20220325.jpg

Step 5: Select your desired movie title(s), audio track(s) and subtitle(s) as well as set the number of DVDs you want to copy onto one BD-R/RE (DL) and then click on the “Next” button.

https://s1.occld.com/image/kb/kb_355_5_20220325.jpg

Step 6: Reading movie data. DVD-Cloner reads the first DVD disc.

https://s1.occld.com/image/kb/kb_355_6_20220325.jpg

After the reading of the first DVD is completed, it will prompt you to insert the second disc. Please insert the second DVD disc, close the drive and click “OK”. Then it will begin to read the second DVD disc. When you insert the second DVD disc, the title selection window will appear and you can customize as you like.

https://s1.occld.com/image/kb/kb_355_7_20220325.jpg

The above process may be repeated for many times, and it depends on how many DVDs you want to combine.

Note

You can also select the following DVD movies from the hard disk to read instead of inserting DVD discs.

Step 7: After the reading of all DVD discs you want to combine, it will prompt you to insert a BD-R/RE (DL) into the Blu-ray burner. Please insert it, close the drive and click “OK”. Then it will start burning.

https://s1.occld.com/image/kb/kb_355_8_20220325.jpg https://s1.occld.com/image/kb/kb_355_9_20220325.jpg

Step 8: Completed!

https://s1.occld.com/image/kb/kb_355_10_20220325.jpg

Updated : 2023-08-11.