DVD-Cloner Knowledge Base

How to combine multiple DVDs to one BD-R/RE(DL) with the Expert interface?

Article ID: 329
Last updated: 17 Nov, 2014

Step 1: Run DVD-Cloner and select the "Combine multiple DVDs to one DVD±R DL or BD-R(DL)" copy mode on the Expert interface.

 

 

Step 2: Insert the source DVD disc and select the target Blu-ray burner/saving path and then click on "Next". If there are several readers on your computers, DVD-Cloner will automatically select the reader with a DVD movie and display the brief information of the DVD movie.

Note: You can also select a DVD movie folder or an ISO file from the hard disk.

 

1. Directly burn to a BD-R/RE(DL) (Default setting): When you enter this window, all the burners available will be displayed and the right one will be selected automatically. (*The burner with a blank BD-R/RE(DL); *The burner used last time)

2. Burn to the hard disk drive: Click on the folder button to select a directory to save the movie. By default this movie will be saved on the hard disk drive as a VIDEO_TS folder, which can be played back by the DVD software player. If you select "Save as ISO image format", the movie will be saved on the hard disk drive as the ISO file, which can be burnt again or uploaded to the Internet easily.

 

Step 3: Select the "Combine multiple DVDs to one BD-R(DL)" and then click on "Next".

 

 

Step 4: You can choose the number of DVDs you want to combine, and define the volume names. Then click on the "Next" button.

 

 

Step 5: Affirm the copy configuration. In this window there will be the task information. Make sure all the information is correct and click on the "Start" button.

 

 

Step 6: Reading movie data. DVD-Cloner reads the first DVD disc.

 

 

After the reading of the first DVD is completed, it will prompt you to insert the second DVD disc. Please insert it, close the drive and click on "OK". Then it will start reading the second DVD disc.

 

 

The above process may be repeated for many times, and it depends on how many DVDs you want to combine.

Note: You can also select the following DVD movies from the hard disk to read instead of inserting DVD discs.

 

Step 7: After the reading of all DVD discs you want to combine, it will prompt you to insert a BD-R/RE(DL) into the Blu-ray burner. Please insert it, close the drive and then click on "OK". Then it will start burning.

 

 

 

Step 8: Completed!

 



Article ID: 329
Last updated: 17 Nov, 2014
Revision: 1
email  Subscribe share  Share pool  Add to pool
Tags
dvd-cloner
Prev     Next
How to find the "movie-only" copy mode?       Combine several movie titles from two DVDs to one DVD+/-R DL.